Cherry Chocolate Valentine Soap Tutorial: Phase 2

So, you have your hearts and swirls all ready to go, now it’s time to make the cold process soap!   I’m assuming you’ve made cold process soap before, but if you need assistance Soap Queen TV has some great tutorials!  I’ve included links to Bramble Berry Soap Supplies for purchasing materials.  For this recipe, you’ll need:

• A 5 pound wooden loaf mold.  (My husband made mine for me, but it’s very similar to the one Bramble Berry sells.)
• 15 oz Olive Oil
• 13 oz Palm Oil
• 12 oz Coconut Oil
• 2 oz Sweet Almond Oil
• 2 oz Castor Oil
• 6.232 oz Sodium Hydroxide (this is superfatted at 5%)
• 14.52 oz Distilled Water
• 1.5 oz Dark Rich Chocolate Fragrance Oil
• 1.5 oz Black Cherry Fragrance Oil
• 1 tsp Pink Oxide (mixed with a carrier oil in a container).
• 1/2 tsp Cappuccino Mica (mixed with a carrier oil in a heat-safe, 32 oz container)

Make your cold process soap as you usually would. While you’re waiting for the lye and oils to cool, you can get out your hearts and swirls and give them a good spritzing of rubbing alcohol.  Place some swirls in the bottom of your soap mold; as many as you like.  Reserve some to place on the top of your soap.

Once you have a light trace, stir in the Dark Rich Chocolate and Black Cherry Fragrance Oils.

Pour about 1/3 of the soap into the container with the Cappuccino Mica.  Stir until the color is blended throughout. 

Pour your Pink Oxide oil into the remaining, 2/3, batch of soap and stir until the color is blended.  I didn’t get a dark pink color because my Olive Oil was very green. 

Pour your pink-colored soap into the soap mold.  Next, layer it with your cappuccino-colored soap.  Hint: pour your layer close to the mold so that it sits on top of the soap rather than sinks below.  Give it some time to set up before inserting your hearts.

Once the soap is firm (but not too firm), you can start inserting the heart soaps.  Start at one end and line them up one after the other, so that they are touching.  Press them about 2/3 of the way into the soap so that just the heart “bumps” are sticking out on the top.  Once you have your hearts firmly in place, you can add your swirls alongside the hearts.  You might need to press them into the soap a bit.  Below is a picture of how mine looked when I took it out of the mold but before I cut the bars.When you slice your bars, slice in between the hearts but close enough to the hearts that you can see them embedded in the soap.

Send me a comment if you have any questions.  Have fun!